(254) 555-0172 Free estimate

Fiber cement and board-and-batten siding in Waco, TX

Siding that goes on straight, tight and built to last.

Grant Hollis and a crew of five install fiber cement, engineered wood and board-and-batten siding across Central Texas. Every joint flashed, every nail hidden, every cut end sealed.

4.9 / 5
138 Google reviews
Since 2012
one crew, never subbed
15 years
workmanship warranty
Siding installer in a work vest driving screws into vertical wood siding beside a window
Two-story house with white lap siding and dark gray board-and-batten on the upper front
Lap and board-and-batten, Woodway

What we install, and what it costs

Installed prices per square foot of wall for 2026, with tear-off, house wrap, flashing, trim and paint included. Your written estimate comes after we measure.

Installer in a dust mask and cap cutting a trim board on a miter saw
Every trim piece is cut on site to fit the wall it goes on.
  • Fiber cement lap

    The classic horizontal look. Will not rot, burn or feed termites. Factory primed, painted on site.

    $10–$14per sq ft

  • Board and batten

    Vertical panels with battens at 12 or 16 inches. Our most requested look for farmhouse and Hill Country styles.

    $12–$16per sq ft

  • Engineered wood

    Lighter than fiber cement with a real wood grain. Pre-finished colors, good impact resistance.

    $8.50–$12per sq ft

  • Shingle and shake panels

    For gables and accent walls. Staggered or straight edge, in fiber cement.

    $14–$19per sq ft

  • Trim, soffit and fascia

    Window and corner trim, vented soffit and new fascia boards, matched to the siding.

    $14–$24per linear ft

  • Repairs and partial walls

    Rotted boards, old woodpecker holes, a single wall after a remodel.

    from $450per visit

Compare the three materials side by side

Pick a material to see how it holds up in Central Texas and what it would cost on a typical 2,000 sq ft wall area, about a 2,200 sq ft two-story home.

Installed on 2,000 sq ft of wall

$20,000–$28,000

Our first choice for most Waco homes. Heavy, stiff and fire resistant. Needs paint every 12 to 15 years.

Expected life50 years

Hail and impactVery good

Low upkeepPaint every 12–15 yrs

Moisture and termitesExcellent

What goes behind the boards

The siding is what you see. The layers behind it decide whether the wall stays dry for the next forty years. Here is what goes into every wall we close up.

Cross-section of a wall showing stud, sheathing, house wrap, flashing tape, furring strips, fiber cement lap siding and caulked trim 123456 Sheathing checked and re-nailedSoft spots replaced before anything goes over them House wrap, lapped like shinglesTaped seams, top piece over bottom piece Rainscreen gapLets the wall drain and dry behind the boards Fiber cement lap, blind nailedNails hidden under the next course Z-flashing over every horizontal trim Sealed trim, painted on site
  1. Sheathing checked and re-nailed
  2. House wrap, lapped like shingles
  3. Rainscreen gap so the wall can dry
  4. Fiber cement lap, blind nailed
  5. Z-flashing over every horizontal trim
  6. Sealed trim, painted on site
  • 2 inchesgap kept above roofs, patios and drives so boards do not wick water
  • 1/8 inchgap at butt joints, then flashed behind instead of caulked
  • 6 sidesevery cut end primed before the board goes up

Three weeks, start to finish

A typical whole-house job in fiber cement. Smaller jobs are shorter. You will know the start date before you sign.

Week 1Measure and order

  • Measured estimate at your house, about an hour
  • Color and trim choices with real samples
  • Materials ordered, delivery date set

Week 2Tear-off and install

  • One wall opened at a time, never left open overnight
  • Sheathing repairs, wrap, flashing
  • Siding and trim go up, about 5 working days

Week 3Paint and walkthrough

  • Caulk, two coats of paint on boards and trim
  • Magnet sweep of yard and beds
  • Walkthrough with Grant, warranty in writing
Installer driving nails into wood boards with a pneumatic nail gun

Two recent jobs

Photos from the last few months, with the details that went into them.

Two-story house with tan lap siding, dark window trim and a covered back porch

1940s farmhouse, Castle Heights

MaterialFiber cement lap, 7 in. reveal
Wall area2,350 sq ft
On site11 working days
ExtraRotted sill plate replaced on two walls
Corner of a house with stained wood-look lap siding and white window trim

Ranch re-side, Woodway

MaterialEngineered wood lap, pre-stained
Wall area1,780 sq ft
On site7 working days
ExtraNew window trim and vented soffit

From homeowners we've worked for

4.9 out of 5 from 138 Google reviews.

“Grant found rot behind the old siding on two walls and showed us before he fixed it. The price change was exactly what he had written down as the per-foot rate. The trim lines are perfect.”

Allison P.Castle Heights · fiber cement lap

“We wanted board and batten on the front and lap on the sides. They drew it on a photo of our house before we picked, which helped a lot. Done in two and a half weeks.”

Marcus D.Hewitt · board and batten

“Small job, one wall after we closed in a porch. They matched the old reveal so well the neighbors asked if anything changed. Cleanest crew we've had here.”

Judy R.Woodway · partial wall

One crew, and the owner on every job

I'm Grant Hollis. I started as a helper on a framing crew at nineteen and put up my first fiber cement wall in 2010. Two years later I started Hollis Siding with one truck and a used brake for bending trim.

We are still one crew. That is on purpose. I measure every house, I am on site every morning, and the same five people who started your job finish it. We do about forty houses a year, which is enough.

Insurance$2M general liability, workers' comp
TrainingManufacturer-certified fiber cement installer
Warranty15 years on workmanship, plus the board maker's warranty
Lead-safeEPA RRP certified for homes built before 1978
Grant, the owner, smiling with arms crossed beside stacked lumber at a supply yard
Grant picking trim stock at the yard on Franklin Avenue.

Waco and about 35 miles around

Drive times from our shop on Bosque Boulevard. Free estimates everywhere on this list.

Under 15 min

  • Waco
  • Woodway
  • Hewitt
  • Bellmead
  • Lacy Lakeview

15 to 25 min

  • China Spring
  • Robinson
  • Lorena
  • McGregor
  • Elm Mott

25 to 40 min

  • Crawford
  • Valley Mills
  • West
  • Riesel
  • Moody

Farther out, like Temple or Hillsboro? We take a few whole-house jobs a year outside the list. Ask.

Ask about your town

Good questions to ask any siding company

Here are our answers.

Fiber cement or vinyl, which is better?

For most houses here, fiber cement. It is stiffer, looks like painted wood up close and handles hail better. Vinyl costs less and never needs paint. We install both and will tell you honestly which fits your house and budget.

Do you remove the old siding?

Yes, always. Going over old siding hides rot and makes trim look thick and wrong. Tear-off and disposal are in the per-foot price.

What if you find rot underneath?

We stop, show you, and fix it at the rate written in your estimate: $6 per sq ft for sheathing and $14 per foot for framing. No surprise numbers.

Do you paint it too?

Yes. Boards come primed. We caulk and put on two coats of exterior paint, or you can choose pre-finished boards with a 15 year finish warranty.

How much is the deposit?

30 percent at signing to order materials, 40 percent when siding goes up, and the rest after the walkthrough.

Can I live in the house during the job?

Yes. We open one wall at a time and close it the same day. Expect noise from 8 to 5 on weekdays.

Book a measured estimate

Grant comes out, measures every wall, and leaves you a written price by material. It takes about an hour and it is free.

  1. We call within one business day to set a time
  2. Grant measures and brings samples
  3. Written estimate in your inbox within two days

Rather talk? (254) 555-0172
Mon–Fri 7:30 am–5:30 pm

Interested in
Call Free estimate